• Stainless steel reinforced spout bushing keeps spout tip round and acts as a captive fastener to prevent tip-end sensor damage.
• Husky XS® nozzle shuts off when: the pump shuts off, the gas tank is full, the lever is opened before the pump is turned on, or the leak detector has not completed its test cycle.
• Nozzle is equipped with a unique Flo-Stop® device that shuts off the nozzle if it falls from the fill tank or raises above the horizontal.
• StreamShaper® reduces turbulence for straighter fuel flow and less splash back spillage.
• Comes standard with smooth full grip guard.
• Tilt poppet design provides precise “to-the-penny” dispensing.
• Optional cold weather seals are rated to -40°F/C.
• Optional sightglass provides a clear window for the customer to view the fuel as it passes through the main poppet valve.
• Optional Gilbarco, Tokheim, and Wayne handguards can be fitted with a magnet to trigger the dispenser’s proximity switch, or can be provided without the magnet for dispensers equipped with a standard “flapper” switch.
• Optional Flo-Equalizer® prohibits the nozzle from exceeding 10 gpm 37.9 Lpm).
• Optional Drip Less spout mitigates the amount of fuel released from the spout tip after refueling is completed.

Specifics:

• Body:
• One-piece die-cast aluminum with high-impact polymer handguard
• Seals: Fluorocarbon
• Packing: Double O-ring seal protected by fiber-reinforced Teflon®
• Lever: One-piece polymer
• Inlet: 3/4” (19 mm) NPT or 3/4” (19 mm) BSP